分体锁产品特点：

1、装饰件（面板执手）用精铸不锈钢，经久耐用；

2、面板分左右开，锁体内外开方向可调；

3、锁体标准规格为60×85B；（通道锁用60单舌锁体）

4、锁体零件的方舌、斜舌、拔动件是精铸不锈钢，衬板，扣板为冷轧不锈钢。锁盒体为黑色电泳电解板；

5、钥匙和旋钮可开启斜舌、方舌，执手自由开启斜舌；

6、配用专利圆钥匙，插入钥匙方便；

7、适合门厚：40-50mm；

8、本产品具有左、右换向之功能。

Separater-lock features:

1、the decorating faceplate lever handle is made of refined casting stainless steel，everlasting and durable

2、the front plate is divided into two kinds of opening direction: from right or from left，the opening direction of lock body from inside or outside can be adjusted

3、the standard specification of lock body is 60×85B

4、the components of lock body-dead bolt，latch bolt，follower are made or refined casting stainless steel; scaleboard and striking plate are made of cold rolled stainless steels. The lock case is made of the black electrophoresis electrolytic board

5、key and knob can trigger latch bolt and dead bolt; lever handle can trigger latch bolt easily

6、use the patent round-shaped key to open; convenient to insert the key

7、the suitable thickness of the door: 40-50mm

8、this product has the direction-changing function from the right to the lef

Q5501SS分体锁安装步骤：

A. 确保斜舌斜面与关门方向一致,根据安装纸规画线开孔。

B.将锁体放入孔。

C.预紧衬板螺钉；

D.从执手圈上拆出外盖，将方杆穿过门板插入锁体。

E.安装内外执手圈组件。

F.使把手转动顺畅，拧紧螺钉。

G.安装扣板及扣盒，对齐锁体，应使锁舌与之配合顺畅，旋入外盖。.

Separater lock installation steps:

A. Make sure the incline of the tongue go with the closing direction. Draw lines and make holes according to the specification.

B.Place the lock into the hole.

C.Pre-fix the screws of the back veneer.

D.Remove the cover from the locking collar and handle collar. Insert the square bar through the door and into the lock.

E.Install the parts of inner and outer handle collar.

F.Make the handle run smoothly. Fix the screws.

G.Install the gusset plate and gusset box, make them parallel to the lock and match the lock tongue. Fix the rose .