产品特点：

1、面板采用挤压型材制作，坚固耐用。

2、压铸铝执手，造型丰富时尚。

3、表面阳极氧化处理，氧化层深度达到10um。

4、特殊加硬处理，硬度达到10度以上，防划伤能力强。

5、适应门厚：40-50mm。

6、锁体规格：60*85C

7、FA分左右开,

Features:

1、The plate adopts squeezed materials. Firm and endurable.

2、Die-casting aluminum handle with fashionable design.

3、The surface has been processed with anodic oxidation, with 10cm oxide layer

4、It has been processed with special hardening, with over 10 degree hardness and stronger anti-scratch

5、It applies to door thickness: 40-50mm

6、Specification of locks: 60*85C

7、FA opens either in the left or right;

产品保养：

1、安装锁具前要仔细阅读说明书，特别注意的是，在没有刷油漆前开孔，油漆干后才将锁安装上。千万不要在油漆未干就装门锁。油漆的挥发性气体会减少锁的使用寿命。

2、锁具在平日开关门的过程中，最好握着执手把锁舌旋进锁体，关好门后再松手，不要用力撞门，否则会减少使用寿命。锁具使用一段时间后，会出现开启不顺畅的现象，不要往锁心内滴机油，将滑石粉或铅笔心的细屑滑入锁心内即可。

3、另外，不要用湿布擦拭锁体和执手，因为有些金属材质的锁具会因此生锈；合金材质的锁具会将镀层磨掉，失去美观的效果。

Maintenance of products:

1、Read carefully the specification of the lock before use. Note that if punching hole before being painted, then do not install the lock until the paint is dry. Never install it before the paint gets dry. The volatile gas of the paint can reduce the useful life.

2、In everday use, it is best to hole the handle to insert the lock-tongue into the lock. Do not let off until the door is closed. Do not bang the dcor, otherwise it would reduce its useful life. When used for a time, the lock may not be opened smoothly. Do not dip mechanical oil into the lock. Instead, slip some French chalk or pencil fines into it.

3、In addition, do not use wet cloth to wipe the lock and handle, because some metallic lock might get rusted. The alloy lock may lose its plated surace, and its brightness.