首页
关于顶固
新闻中心
产品展厅
营销网络
顶固视觉
家装百宝箱
促销活动
客户服务
经销商专区
信息反馈
招聘信息
I3078SN欧式豪华插芯锁



查看大图
名称 :I3078SN欧式豪华插芯锁
型号 :I3078SN
原产地 :广东中山
分类 :五金、工具 - 门窗五金/其他门窗五金
关键字 :五金 锁
系列 :五金 - 门锁系列 - I系列木门移门锁
描述

1、安装锁具前要仔细阅读说明书,特别注意的是,在没有刷油漆前开孔,油漆干后才将锁安装上。千万不要在油漆未干就装门锁。油漆的挥发性气体会减少锁的使用寿命。

2、锁具在平日开关门的过程中,最好握着执手把锁舌旋进锁体,关好门后再松手,不要用力撞门,否则会减少使用寿命。锁具使用一段时间后,会出现开启不顺畅的现象,不要往锁心内滴机油,将滑石粉或铅笔心的细屑滑入锁心内即可。

3、另外,不要用湿布擦拭锁体和执手,因为有些金属材质的锁具会因此生锈;合金材质的锁具会将镀层磨掉,失去美观的效果。

Lock maintenance of products:

1Read carefully the specification of the lock before use. Note that if punching hole before being painted, then do not install the lock until the paint is dry. Never install it before the paint gets dry. The volatile gas of the paint can reduce the useful life.

2In everday use, it is best to hole the handle to insert the lock-tongue into the lock. Do not let off until the door is closed. Do not bang the dcor, otherwise it would reduce its useful life. When used for a time, the lock may not be opened smoothly. Do not dip mechanical oil into the lock. Instead, slip some French chalk or pencil fines into it.

3In addition, do not use wet cloth to wipe the lock and handle, because some metallic lock might get rusted. The alloy lock may

 

移门锁产品特点:

1、可提供带钥匙和不带钥匙两种,锁体适用内外开启

2、适应门厚:38-48mm

3、使用场合:移门、推拉门

4、表面处理:银拉丝

5、面板规格: 142*40(长X宽),

6、锁体规格:46mm单钩舌移门锁体

7、执手面板采用澳洲3#锌合金材料制作,结合特殊的多层电镀工艺,色泽持久、手感细腻,耐腐蚀性能优良,盐雾实验时间远远超过国标要求的24小时,再经硬度4H以上的清漆封闭,烤漆温度达150;表面光滑,大大提高了防腐,防划伤能力。且不沾灰尘油污。

 

Sliding-lock Features:

1providing two types: with or without keys for unlocking both inside and outside

2thickness of the door: 38-48mm

3usage occasion: slding door

4surface process: silver drawbenching

5size of the plate: 142*40

6specification of lock: 46mm

7Keep the hand face plate 3# zinc in Australia  alligation material manufacture, combining many special lamellas  plating craft, the color and luster endure, the feeling of hand is delicate, bearing to decay the function good, the salt fog  experiment time marks 24 hours of request far above the country far, again through the 4 Hs of hardness  above varnish seal, roast to paint the temperature to amount to 150 s;The surface is smooth, raising the antisepsis consumedly, defending the scoring, scuffing ability.And don't be stained with the greasy dirt of dust.

移门锁安装步骤:

A.        根据安装纸规画线开孔。

B.         安装锁体及衬板,拧紧螺钉。

C.         内外面板对齐,用螺钉预紧在门上,使钥匙及旋钮转动顺畅。

D.        安装扣板及扣盒,对齐锁体,应使锁舌与之配合顺畅,拧紧螺钉。

 

Sliding- lock installation steps:

A.        Draw lines and make holes according to the specification.

B.         Intall the lock and back veneer. Screw down the screw.

C.         Make the inner and outer plates parallel to each other. Pre-fix the screws of the back veneer. Make the key and knob run smoothly.

D.        Install the gusset plate and gusset box. Make them parallel to the lock and match the lock tongue. Fix the screws.

 

相关文章

相关图片

最新评论
昵称 验证码
<内容请勿超出2000个字,快捷键:Ctrl+Enter>
公司名片
中山市顶固金属制品有限公司
所属行业:装修装饰业
联系电话:0760-22630858
传真号码:0760-23304967
地址:广东中山市东凤镇和穗工业园东区7-2号
公司网址www.dinggu.net
电子邮件topstrong@dinggu.net
经营范围:五金 生态门 滑动门 衣帽间
产品搜索
名称 :
系列 :
价格 :从
产品展厅
五金

咨询服务热线:

总部:400 883 5858   

联系电话:0760-22630858/22620977  传真:0760-23304967/23304979
地址:广东中山市东凤镇和穗工业园东区7-2号 邮编:528425
邮件:topstrong@dinggu.net 网址:www.dinggu.net 在线客服
版权所有:中山市顶固金属制品有限公司